-
Z4 type locking assembles
The Z4 expansion sleeve is composed of an open double-cone inner ring with different taper, an open double-cone outer ring with different taper and two double-cone compression rings, which are locked with hexagonal bolts. Compared with the Z2, the combination surface is long and the centering accuracy is high, which is used for the occasions where the rotation accuracy is higher and the load is larger.
-
Z2 type locking assembles
The Z2 expansion sleeve is composed of an open double-cone inner ring, an open double-cone outer ring and two double-cone compression rings. The elastic ring does not move axially relative to the hub when tightened. Compared with the Z1 type, the same compression force can produce greater radial pressure and transfer greater load. In order to facilitate disassembly, there is a screw hole for disassembly on a pressing ring, and there are 2~4 places along the circumference.
-
Z1 type locking assembles
Z1 type expansion coupling sleeve expansion and expansion sleeve 1, compact and lightweight, suitable for small installation occasion2, can replace a variety of key or interference fit key connection used 3, in order to transfer large loads can use multiple reconciliation sleeve, single side compression can not exceed 4 pairs of rings.
-
Withdrawal Sleeve AH3218 AH3219 AH3220
AH3218: d:90mm B:63mm B4:67mm
AH3219: d:95mm B:67mm B4:71mm
AH3220: d:100mm B:73mm B4:77mm
-
Withdrawal Sleeve AH2308 AH2309 AH2310
AH2308: d:40mm B:40mm B4:43mm
AH239: d:45mm B:44mm B4:47mm
AH2310: d:50mm B:50mm B4:53mm
-
Withdrawal Sleeve AHX2236 AHX2238 AH2240
AHX2236: d:180mm B:105mm B4:110mm
AHX2238: d:190mm B:112mm B4:117mm
AH2240: d:200mm B:118mm B4:123mm
-
Withdrawal Sleeve AHX31/500 AH31/530 AH31/560
AHX31/500: d:500mm B:313mm B4:325mm
AH31/530: d:530mm B:325mm B4:337mm
AH31/560: d:560mm B:335mm B4:347mm
-
Withdrawal Sleeve AH3120 AH3122 AH3124
AH3120: d:100mm B:64mm B4
AH3122: d:110mm B:68mm B4
AH3124: d:120mm B:75mm B4
-
Withdrawal Sleeve AH308 AH309 AH310
AH308: d:40mm B:29mm B4:32mm
AH309: d:45mm B:31mm B4:34mm
AH310: d:50mm B;35mm B4:38mm
-
Withdrawal Sleeve AHX30/500 AH30/530 AH30/560
AHX30/500: d:500mm B:209mm B4:221mm
AH30/530: d:530mm B:230mm B4:242mm
AH30/560: d:560mm B:240mm B4:252mm
-
Withdrawal Sleeve AH3024 AH3026 AH3028
AH3024: d:120mm B:60mm B4:64mm
AH3026: d:130mm B:67mm B4:71mm
AH3028: d:140mm B:68mm B4:73mm
-
Withdrawal Sleeve AH208 AH209 AH210
AH208: d:40mm B:25mm B4:27mm
AH209: d:45mm B:26mm B4:29mm
AH210: d:50mm B:28mm B4:31mm