Factory Cheap Hot Bearing 24140 - Thrust Cylindrical Roller Bearings – Chengfeng Bearing

Product features：

Cylindrical rollers are crowned so that the pressure distribution between the rollers and the raceway surfaces is uniform.
This type of bearing is a separate structure, which can be installed with shaft washer, seat washer, and rolling element components. The axis of the shaft and the housing is not allowed to be inclined during installation. It is used at low speed and can withstand one-way axial load, and cannot limit radial direction displacement. The axial load capacity is large, and the axial rigidity is also strong.

Application

This type of bearing is mainly used in hydraulic generators, vertical motors, propeller shafts for ships, tower cranes, extruders, etc.

Size range:

Inner diameter size range: 30mm~1800mm
Outer diameter size range: 52mm~2080mm
Width size range: 14mm~250mm

Tolerance: P0, P6, P5, P4 precision grades are available.
cage
The cage generally adopts brass solid frame and steel solid frame.
Supplementary code:
X1- non-standard outer diameter;
X2-width (height) non-standard:
X3- outer diameter, width (height) non-standard (standard inner diameter):
F1-carbon steel;
F3-ductile iron:
HC ferrules and rolling elements or only ferrules or only rolling elements are made of carburized steel (/HC-20Cr2Ni4A/HC1-20Cr2Mn2MoA;/HC2-15Mn;/HC3-G20CrMo);
M-brass solid cage
P5 – Tolerance class conforms to class 5 specified by the standard:
P4 – Tolerance class conforms to class 4 specified by the standard;
SP-special precision grade, the dimensional tolerance is equivalent to grade 5, and the rotation accuracy is equivalent to grade 4;
YB2 – Bearing size and tolerance requirements changed;
YB5-geometric tolerance has special requirements